The hard-working development team led by W1HKJ have announced the release of Flrig v1.3.40. Flrig is a transceiver control program designed to be used either stand alone or as an adjunct to Fldigi. This version of Flrig is a minor maintenance release with a fixes and enhancements to several rigs supported by Flrig. Full details are available in the ReadMe […]
Bill Myers, K1GQ, released version 2.2.7 of his contest logging software SkookumLogger for macOS. SkookumLogger is a full-featured contest software package suitable for the most demanding contester. 2.2.8 2018-07-16 Note Some features specific to WRTC 2018 have been hidden or removed in this release. New features SkookumLogger now supports the IC-7610 radio. Thanks WD7K and NØEHX. SkookumLogger now supports […]
Anders Östlund (SM0THU) released Version 2.5.2 of JT-Bridge. JT-Bridge acts like a bridge between WSJT-X and your logging application. It features: Displays CQs from WSJT-X Double-click on a CQ to reply in WSJT-X Check QSO and QSL status of calls, DXCC entities, CQ zone, ITU zone, State, IOTA, Grid and Continent in your logging application Send logged QSOs from WSJT-X […]
Bill Myers, K1GQ, released version 2.2.7 of his contest logging software SkookumLogger for macOS. SkookumLogger is a full-featured contest software package suitable for the most demanding contester. 2.2.7 2018-06-20 Note The next update will not occur before WRTC 2018 unless a serious bug is discovered. The AS #6 team will be using SkookumLogger in that event, which occurs within […]
Dog Park Software has announced that version 6.19 of MacLoggerDX has been released. What’s New in this version: Create Radio Port symlinks for SiLabs IC-7100, IC-9100. Rotor init delay for Arduino controllers. Added 2nd Rx button support for Icom IC-7610. Supply spots to Flex radio for SmartSDR 2.3+. Click on Bearing HUD to move rotor. WebMap […]
Mario, DL3LSM, has released version 1.0 of xCAT and version 1.0 of xDAX with support for SmartLink. A new set up and use document is also available which includes examples of how to configure software to use xCAT and xDAX. xCAT was written as a helper application for the FlexRadioTM 6000 series running on macOS (10.11 and […]
Anders Östlund (SM0THU) released Version 2.5.1 of JT-Bridge. JT-Bridge acts like a bridge between WSJT-X and your logging application. It features: Displays CQs from WSJT-X Double-click on a CQ to reply in WSJT-X Check QSO and QSL status of calls, DXCC entities, CQ zone, ITU zone, State, IOTA, Grid and Continent in your logging application Send logged QSOs from WSJT-X […]
The hard-working development team led by W1HKJ have announced the release of Fldigi v4.0.17. This update release of Fldigi brings several bug fixes, performance improvements and several new features.. Full details are available in the ReadMe file available for download and below this announcement. As with all of the FL suite, Fldigi continues to support both PowerPC and Intel (i386) processors; with individual downloads available for […]
FlexRadio Systems announces the release of SmartSDR for iOS v2.4.2 is now available for download or update from the Apple App Store. This App requires a FlexRadio Systems FLEX-6000 Signature Series Software Defined Radio (SDR) Device. However, the App also contains a FlexRadio Simulator (Demo Mode) that provides an approximation of the App’s features so you […]
Anders Östlund (SM0THU) released Version 2.5.0 of JT-Bridge. JT-Bridge acts like a bridge between WSJT-X and your logging application. It features: Displays CQs from WSJT-X Double-click on a CQ to reply in WSJT-X Check QSO and QSL status of calls, DXCC entities, CQ zone, ITU zone, State, IOTA, Grid and Continent in your logging application Send logged QSOs from WSJT-X […]
