SmartSDR for MacOS version 1.4.1 has been released

Digital Modes, FlexRadio, macOS, Rig Control, SDR 0 Comments

Post Views: 531
Marcus, DL8MRE announces the release of version 1.4.1 of SmartSDR for MacOS, the Official FlexRadio Systems® Client for your Mac
SmartSDR is a full featured FlexRadio client that enables your Mac to operate your FlexRadio device.
It is fully compatible to SmartSDR v1, v2 (including SmartLink) and v3 (including MultiFlex and SmartControl).
Important: This App requires a FlexRadio Systems® Series-6000 Software Defined Radio (SDR).FACTS AND FEATURES:
SmartSDR offers all features of SmartSDR for Windows such as:
■ Unlimited number of Slices, Panadapters (limited only by Radio model)
■ Maintain all Radio, Slice and Panadapter settings
■ SmartLink™ remote access support
■ MultiFlex™ support
■ And all the other featurs of the Windows Version (only exception: Diversity)There is no longer need for running SmartSDR for Windows on Bootcamp, Parallels or a separate PC because these features are also included:
■ Radio Firmware Updates
■ Setting up and registering SmartLink – you can even maintain multiple SmartLink accounts
■ Installation of Region (Turf) Files
■ Backup / Restore Radio Configuration and MemoriesIn addition, the following extra features are included:
■ Full featured FT8 / FT4 Tool
■ Logbook with auto logging and ADIF Im- and UDP Export (Synchronizes with Smartsdr for iOS over iCloud)
■ DX-Cluster Tool
■ Band Plan
■ And several additional Tools and features

EXTERNAL SOFTWARE SUPPORT
Even though FT8 is included, you can run this App along with your favorite external Software like WSJT-X, fldigi or others because:
■ CAT Support for FlexRadio CAT, Kenwood TS-2000 emulation and RigCtrl / Hamlib
■ DAX TX and RX audio streaming to any device

EXTERNAL PERIPHERALS SUPPORT
■ You can use a Midi Controller (like the CMD-Micro and others) to fully control your Radio
■ CW Straight Key / Paddle via Midi Controller or assigned keyboard keys
■ External Mike support (e.g. for USB Mikes)

Please note: This is no Catalyst Version of SmartSDR for iOS. This is a completely new written native macOS App.

WHAT YOU NEED:
– A FlexRadio Systems® FLEX-6000 series radio
– A Mac which runs at least Mac OS 10.15

SUPPORTED SDR HARDWARE:

FLEX-6300, FLEX-6400, FLEX-6400M, FLEX-6500, FLEX-6600, FLEX-6600M, FLEX-6700
Find out more here: http://go-to.me/smartsdr

Read the Manual: http://go-to.me/smartsdrmac-manual

What’s new in version 1.4.1

This update includes the following changes and fixes:

■ This update includes the following changes and fixes:

■ Spots from other external Software will now be displayed on the Panadapter
■ The WSJT-X UDP log format is now also supported. This way, logs can be submitted to additional external logging programs
■ ToolTips for BandMode, Spots and Memories on Panadapter added
■ Fixed an issue where TX audio got distorted after longer transmits
■ The Radio Control Panel will now be brought to top if the App is activated
■ Fixed a few remaining issues with assigning functions to the FlexControl
■ Fixed a few minor issues in the Logbook tool.
■ Fixed an issue where EQ level numbers are not changing when loading another profile
Version 3.9.10, which was released last week, fixed fixed a crash when using FT8.
SmartSDR for MacOS is available for $149.99 now on the Mac AppStore.
The latest update can be downloaded for free.
macappstorebadge

 

Related posts:

  1. SmartSDR is now available for your Mac.
  2. SmartSDR for MacOS version 1.8.02 has been released
  3. SmartSDR for MacOS version 1.9.14 has been released
  4. SmartSDR for MacOS version 2.0.05 has been released
  5. SmartSDR for MacOS version 2.0.19 has been released